Appendix
Additional information
Specifications
Power source | 14.4 V DC (10.8 V to 15.1 V |
| allowable) |
Grounding system | Negative type |
Current consumption | 35 A (at continuous power, |
| 4 W) |
Average current drawn | 9 A (4 W for four channels) |
| 15 A (4 W for two channels) |
Fuse | 25 A × 2 |
Dimensions (W × H × D) ... | 265 mm × 62 mm × 346 |
| mm |
| |
| 2 in.) |
Weight | 3.8 kg (Leads for wiring not |
| included) |
Maximum power output | 120 W × 4 (4 W) / 300 W × 2 |
| (4 W) |
Continuous power output ... | 60 W × 4 (at 14.4 V, 4 W, 20 |
| Hz to 20 kHz 0.2% THD) |
| 150 W × 2 (at 14.4 V, 4 W, 20 |
| Hz to 20 kHz 0.8% THD) |
| 75 W × 4 (at 14.4 V, 2 W, 20 |
| Hz to 20 kHz 0.8% THD) |
Load impedance | 4 W (2 W to 8 W allowable) |
| (Bridge connection: 4 W to 8 |
| W allowable) |
Frequency response | 10 Hz to 50 kHz (+0 dB, |
| dB) |
95 dB | |
Distortion | 0.03 % (10 W, 1 kHz) |
Separation | 70 dB (1 kHz) |
Low pass filter: |
|
Cut off frequency | 80 Hz |
Cut off slope | |
High pass filter: |
|
Cut off frequency | 80 Hz |
Cut off slope | |
Gain control: |
|
RCA | 200 mV to 6.5 V |
Speaker | 0.8 V to 26 V |
Maximum input level / impedance: | |
RCA | 6.5 V / 22 kW |
Speaker | 26 V / 90 kW |
CEA2006 Specifications
Power output | 60 W RMS × 4 Channels (at |
| 14.4 V, 4 W and ≦ 1 % THD |
| +N) |
| 150 W RMS × 2 Channels |
| (at 14.4 V, 4 W BRIDGE and |
| ≦ 1 % THD+N) |
| 75 W RMS × 4 Channels (at |
| 14.4 V, 2 W and ≦ 1 % THD |
| +N) |
S/N ratio | 80 dBA (reference: 1 W into |
| 4 W) |
Notes
!Specifications and the design are subject to modifications without notice due to improve- ments.
!The average current drawn is nearly the maxi- mum current drawn by this unit when an audio signal is input. Use this value when
working out total current drawn by multiple power amplifiers.
14 En