Pioneer GM-6400F owner manual Connecting the power terminal, Connecting the units

Connecting the units

5Gray/black: CH A, Right *

6Gray: CH A, Right +

7Violet: CH B, Right +

8Violet/black: CH B, Right *

9Green/black: CH B, Left * a Green: CH B, Left +

b Speaker input connector

To speaker input terminal of this unit.

Connecting the power terminal

!The use of a special red battery and ground wire RD-223, available separately, is recom- mended. Connect the battery wire directly to the car battery positive terminal (+) and the ground wire to the car body.

WARNING

If the battery wire is not securely fixed to the term- inal using the terminal screws, there is a risk of overheating, malfunction and injury, including minor burns.

1Route battery wire from engine com- partment to the vehicle interior.

After completing all other amplifier connec- tions, finally connect the battery wire terminal of the amplifier to the positive (+) battery terminal.

1Positive (+) terminal

2Engine compartment

3Vehicle interior

Section

03

4	Fuse (30 A) × 2	English
5	Insert the O-ring rubber grommet into the
	vehicle body.
6	Drill a 14 mm hole into the vehicle body.

2Twist the battery wire, ground wire and system remote control wire.

Twist

3Attach lugs to wire ends. Lugs not sup- plied.

Use pliers, etc., to crimp lugs to wires.

1Lug

2Battery wire

3Ground wire

4Connect the wires to the terminal. Fix the wires securely with the terminal screws.

En 11