Section
03 Connecting the units
1System remote control terminal
2GND terminal
3Power terminal
4Terminal screws
5Battery wire
6Ground wire
7System remote control wire
Connecting the speaker output terminals
1Expose the end of the speaker wires using nippers or a cutter by about 10 mm (3/8 inch) and twist.
Twist
2Attach lugs to speaker wire ends. Lugs not supplied.
Use pliers, etc., to crimp lugs to wires.
1Lug
2Speaker wire
3Connect the speaker wires to the speaker output terminals.
Fix the speaker wires securely with the term- inal screws.
1Terminal screws
2Speaker wires
3Speaker output terminals
12 En