Tascam manual Parts of the US-144, Top panel

2 – Parts of the US-144

Top panel

1LINE OUT level knob Controls the output level of the LINE OUT jacks.

2PHONES LEVEL knob Controls the output level of the PHONES jack.

3MIDI IN indicator Lights when MIDI data is being received at the MIDI IN con- nector.

MIDI OUT indicator Lights when MIDI data is being transmitted from the MIDI OUT connector.

4USB indicator Lights to indicate a valid USB connection to the host comput- er.

5MON MIX balance knob Controls the balance of the signal sources being out- put from the LINE OUT jacks and the PHONES jack. When this knob is turned to the far left, the signal being input to the US-144 (from the XLR jacks, or 1/4" phone jacks) will be output. When this knob is turned to the far right, the output signal received from the computer via USB will be output.

6MONO switch Turn this switch ON if you want to monitor in monaural. This switch affects only the analog input signal.

7INPUT knobs (L, R) Adjust the level of the audio signal being input to the MIC IN jacks and LINE IN jacks.

TASCAM US-144