Tascam US-144 manual Troubleshooting, Cannot set the locator region to more than ten min- utes

This chapter lists frequently asked ques- tions related to recording with Cubase LE, with answers to these questions.

Q. I have finished making input settings, but the meter of the audio track is not moving.

A.Make sure that the monitor button of the track is enabled.

Monitor

Q. I would like to record two channels simultaneously for a stereo recording.

A.Before you record, press the stereo/ mono select button of the track so that the yellow indicator is lit. In this case, the track input is shown as In 1 + In 2 or a similar indication.

Stereo/mono select

7 – Troubleshooting

EQ bypass

Q.I mixed-down a song that was three minutes long, but the result was only ten seconds long.

A.Make sure that the left and right locator

region is set to the entire range that you want to mix down.

Q. I cannot set the locator region to more than ten min- utes.

A.The default setting is ten minutes. From the Project menu, choose Project Setup and adjust the length of the project.

Q. I am trying to use the EQ, but it does not seem to do any- thing.

A.Check the VST channel settings etc. to make sure that EQ bypass is not enabled.

TASCAM US-144 21