16 Models 150, 152, 162, 168Operating Procedures
Step 6
Install the draw valve handle. Insert the valv e lifter arm
through the slotted opening in the draw valve and align
the other end with the cross holes of the freezer door.
Hint: The valve lifter arm may be aligned wit h the left
or right cross hole. The draw valve handle will be
placed through the opposite cross hole of the valve
lifter arm.
Figure 15
Slide the o-ring into the groove on the draw valve
handle and lubricate with Taylor Lube.
Figure 16
Insert the draw valve handle through the opposite
cross hole and into the opening of the valve lif ter arm.
Hint: The draw valve handle can be assembled at
varied vertical positions. Choose an angle which is
comfortable for you. The draw valve must be rais ed
completely when the draw valve handle is down.
Figure 17
Figure 18
Note: For Models 162/168, slide the o-ring ont o each
pivot pin and lubricate with Taylor Lube.
Figure 19