18 Model 220Operating Procedures
Step 5
When full strength mix is flowing from the ejection port,
push the draw rod back into the valve body and lock
into place.
Figure 32
Note: The funnel can be returned to its closed
position. Another measure of mix can be poured into
thehopper in r eadiness for the next batch while the first
batch of mix is freezing.
Figure 33
Step 6
Place the mix hopper cover in position.
Figure 34
Step 7
Placet he control switch in the “AUTO” position. W hen
the unit automatically cycles off, the light will turn off.
This light is a visual signal that the product is down t o
its proper temperature. Place the c ontrol switch in the
“OFF” position.
Figure 35