![](/images/new-backgrounds/1276555/27655529x1.webp)
b)To see Calorie Value Save in Memory
1.Press the MR key while the scale is in weighing mode to show the total calories in memory.
2.Press the MR key again to show total calories of the meal. Press (▲) or (▼) to select the meal number and see the values.
3.Press the MR key again to show total calories of the food. Press (▲) or (▼) to select the food number and see the values.
4.Press “CANCEL” to return to the weighing screen.
Press MR
Press MR
Press “▲” or “▼” to | Press MR | Select |
select |
|
|
c)Adding Foods to Memory at a Later Time
If you are unable to use your Taylor
1.As described in the “ANALYZING YOUR FOODS” section (page 7), use the key pad to display a food and press “ENTER” to select.
2.DO NOT put anything on the scale. Wait for the weighing screen to appear. Estimate the weight of the food you wish to record
in grams.
TIP: 1oz = approximately 28g
3.Manually enter the estimated weight by pressing the appropriate numbers on the key pad; Press “ENTER”.
4.Press “M+” to add this food to memory.
15