28 Model C043Operating Procedures
Step 5
Open the draw arm plate and turn the flow
adjustment knob to “5”. Run the remaining mix
through the freezing cylinder and properly dispose of
the mix.
Figure 58
Note: If local healthcodes permit the use of
rerun, place a sanitized, NSF approved rerun
container beneath the opening of the front plate and
run the remaining mix into the container. See
page 36 for instructions regarding the proper use of
rerun.
Step 6
After all the custard has drained from the hopper,
remove the hopper cover, the flow control rod and
the feed tube.
Figure 59
Step 7
Repeat these steps for the remaining freezin g
cylinders.
Rinsing
Step 1
Place the hopper refrigeration switch in the “OFF”
position.
Figure 60
Step 2
Make sure the refrigeration switch is in the “OFF”
position.
Figure 61