
16 Model C300Important: Tothe Operator
DEFROST TIME RIGHT
CYCLE 1 SUN 10:00
<-- - -> +++ - - - SEL
Press the MENU(SEL) key to return to the
OPERATOR MENU.
Screen F is CURRENT CONDITIONS. This screen
displays the current viscosity, product temperature,
and pressure for each freezing cylinder. An asterisk
will indicate which side is refrigerating. Press the
MENU (SEL) keyto return to the OPERATOR
MENU.
Note: Viscosity is checked only when product
temperature is below 40_F/4.4_C.
CURRENT CONDITIONS
L*1200Hd 27.3F
R*2140Hd 27.3F
SEL
Screen G is FAULT HISTORY. This option provides
a record of the last 20 faults. The display also
indicates the date and time each fault occurs.
FAULTHISTORY 1
06/25/01 08:34
NO FAULTFOUND
<-- - -> +++ -- - SEL
Press the AUTO (- -> ) and O FF (<- - ) keys to
increase or decrease the fault page.
Page numbers are located in the upper right hand
corner of the display. The most recently recorded
fault will appear on page 1. The fault descriptio n is
listed on the third line of the fault page.
FAULTHISTORY 2
06/25/01
R SYRUP PRESS LOW 08:33
<-- - -> +++ -- - SEL
Press the AUTO (- - >) key to move to t he next
screen. The next screen will indicate when the fault
was satisfied.
FAULTHISTORY 2
06/25/01 14:06:19
RESTORED FROM FAULT
PAGE2 +++ - - - SEL
Press the MENU(SEL) key to return to the
OPERATOR MENU.
Screen H is RINSE/SANITIZE. This screen allows
the operator to rinse or sanitize the freezing
cylinder(s).
RINSE / SANITIZE
RINSE SANITIZE EXIT
---
<- - - - > SEL
Use the AUTO (- - >) and OFF (<- - ) keys to select
either RINSE or SANITIZE, and then pres s the
MENU (SEL) key.
SANITIZE
LEFT SIDE YES NO
---
<- - - - > SEL
Use the cursor keys to select YES or NO, then
press the MENU (SEL) key.
SANITIZE
RIGHT SIDE YES NO
---
<- - - - > SEL
Repeat for the right side of the unit.
Screen I is SERVICE MENU. This screen allows
the authorized service technician to access service
information. Press the MENU (SEL) key to return to
the OPERATORMENU.
OPERATORMENU
ABCDEFGHI
SERVICE MENU
<- - - - > SEL