25
Model 8756 Operating Proced ures
Sanitizing
Step 1
Prepare a pail of approved 100 PPM sanitizing solu-
tion (examples: 2-1/2 gal. [9.5 liters] of Kay-5Ror
2 gal. [7.6 liters] of Stera-SheenR). USE WARM
WATER AND FOLLOW THE MANUFACT URER'S
SPECIFICATIONS.
Step 2
Place the pail of sanitizing solution inside the mix
cabinet.
Step 3
Brush clean the mix inlet tube with the long brush
and the sanitizing solution.
Figure 43
Step 4
Connect the free end of the flare line to the threaded
fitting on the mix inlet tube.
Figure 44
Step 5
Attach the quick disconnect fitting of t he pressure
line to the other fitting on the mix inlet tube, just
above the flare line. Allow the other end to hang
free.
Figure 45
Step 6
Insert the free end of the suction line and the
pressure line into the pail of sanitizing solution.
Figure 46
Step 7
Place the power switch in the ON position.