26 Model 8756Operating Procedures
Step 8
Press the PUMP key. A light will illuminate,
indicating that the air/mix pump is operating. This
action will cause the sanitizing solution to be
pumped through the air/mix pump and out through
the pressure line. After approximately 15 seconds,
press the PUMP key. The light will extinguish and
the pump will stop operation.
Figure 47
Step 9
Drain the pressure line. Connect the free end of the
pressure line to the pressure switch.
Figure 48
Step 10
Place an empty pail beneath the door spout. Raise
the prime plug.
Figure 49
Step 11
Press the WASH and PUMP keys. The indicator
lights will illuminate, indicating pump and beater
motor operation.
Figure 50