TC electronic SDN BHD DVR2 manual Global PLUG-IN Controls, Keyboard Commands, Scroll Wheel Support

E N G L I S H

GLOBAL PLUG-IN CONTROLS

KEYBOARD COMMANDS

In most host applications, the DVR2 Reverb supports keyboard commands for certain functions. The following key commands are available for all plug-in parameters:

Key Commands in Mac OS X:

Fine Adjust = Apple key + mouse movement

Reset To Default = Alt key + mouse click

Key Commands in Windows:

Fine Adjust = Alt + mouse movement

Reset To Default = Shift + Control + mouse click

User Assignable Key Commands:

Depending on your host application, you have the ability to add your own keyboard shortcuts to certain buttons. The supported buttons in DVR2 are: Mem., A/B, the pre- vious/next preset buttons and the “Vintage Reset” button.

A right mouse click on the button will open a pop-up menu. Here you can select to assign a new keyboard shortcut or to remove a previously assigned shortcut.

Note: The ability to use the assignable key commands highly depends on the host application. Some applications do not pass key commands on to the plug-in.

SCROLL WHEEL SUPPORT

If you are using a host application that supports this feature, all of the DVR2 knobs and faders support scrolling on both Windows XP and Mac OS X. Simply roll your mouse over a knob or slider and use the Scroll Wheel to increment / decrement the associated parameter.

USER INTERFACE DISABLED

Should your PowerCore be fully loaded and there is not enough free processing on your DSPs, the plug-in will come up in a “disabled” state. Should this occur, it is advised to remove the plug-in from the mix.

Note: In case any PowerCore plug-in gets disabled either while loading a session or during your work (e.g. you forgot to switch on PowerCore prior to loading a session),

6/ DVR2