OPERATIONS
Playing a disc
1.Select CD function.
2.Press 
to open the CD door. “OPEN” is displayed.
3.Insert a disc with the printed side facing up and press 
to close the CD door. “CD READ” is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time are shown.
4.Press PLAY ( 
) to start playback. To interrupt playback
• Press PLAY (
). The current track time flashes.
• To resume playback, press PLAY (
) again.
To stop playback
• Press STOP ( 
).
Playing back from SD memory card This system is equipped with a SD card slot for SD memory card.
1.Insert a SD memory card to SD slot.
2.Select
3.The total numbers of folder and track are displayed.
4.Press PLAY ( 
) to start playback. To interrupt playback
• Press PLAY (
). The current track time flashes.
• To resume playback, press PLAY (
) again.
To stop playback
• Press STOP ( 
).
Playing back from the USB mass storage class device
This system is equipped with a USB port to connect a USB mass storage class device.
1.Connect a USB mass storage class device to USB port.
2.Select
3.The total numbers of folder and track are displayed.
4.Press PLAY ( 
) to start playback. To interrupt playback
•Press PLAY (
). The current track time flashes.
•To resume playback, press PLAY (
) again.
To stop playback
•Press STOP ( 
).
NOTE:
Connect the USB mass storage class device directly to the system. Using a USB hub may result in malfunction.
Selecting a different track
•Press 
or 
repeatedly until the desired track number appears in the display.
Locating a particular portion
•Press and hold down on 
or 
until the portion you want is reached.
Selecting a desired folder/track
To select a desired album
•Press FOLDER/PRESET ( 
or 
) on remote control repeatedly.
To select a desired track
•Press 
or 
repeatedly until the desired track number appear in the display.
•If playback is stopped, press PLAY ( 
) to start playback.
Searching for a name of track/folder
To select the track by searching for its name. (for
1.Press FIND/ST/MO once on the remote control. An initial letter of a track name
and a track name are displayed.
2. Press 
or 
repeatedly to select a initial letter of track name.
5
