RADIO
Tuning to radio stations
1.Press FUNCTION(Tuner/CD/AUX/
2.Press BAND to select the desired waveband: FM or MW.
3.Press down on or and release it. The frequency display begins change until a radio station with sufficient signal strength is found. If a FM station is received in stereo, is shown.
4.Repeat step 3 if necessary until you find the desired station.
To tune to a weak station, press or briefly and repeatedly until you have found optimal reception.
Programming radio stations
You can store 30 FM and 10 MW stations to memories respectively.
1.Tune to your desired station (refer to “ Tuning to radio station”).
2.Press MEM/CLK SET, preset no. is flashing.
3.Press FOLDER/PRESET ( or ) to select your desired preset no.
4.Press MEM/CLK SET again to confirm the station to be stored.
5.Repeat the above steps to store other stations.
Tuning to preset radio stations
•Press FOLDER/PRESET ( or ) until the desired preset station is displayed.
SPECIFICATIONS
Supply Voltage :230V AC/50Hz
Power Consumption:40W
Radio Frequency Range:FM 87.5 - 108.0 MHz
|
| MW 522 - 1620 kHz |
Power Output |
|
|
(Subwoofer | : | Typical 15W at 4ohm |
|
| Speaker, THD = 10% |
(Speaker | : | Typical 7.5W at 8ohm |
|
| Speaker, THD = 10% |
Dimensions (H x W x D): | ||
Main Unit | : 160 x 220 x 80 mm | |
Subwoofer | : | 225 x 130 x 230 mm |
Satellite Speaker | : | 160 x 193 x 60 mm |
Net Weight | : | 5.4kg |
8