Teac CR-H257I IMPORTANT, Direct Playback (CD/MP3/WMA)

Direct Playback (CD/MP3/WMA)

While in stop or playback mode, you can use the numeric buttons of the remote control to select a track.

When you use the numeric buttons, press the CD button of the remote control first.

Press the numeric buttons to select a track. Playback starts from the selected track.

For instance, to select track number 35, press “3” and “5”.

To select numbers less than 10, press the number and then the ENTER button. As an example, to select number 5, press “5” and the ENTER button. (Optionally, you may press just the number “5” and then wait a few seconds.)

IMPORTANT

Numeric buttons for CD and TUNER

To use the numeric buttons in CD mode or in TUNER mode, you have to press the CD button or the TUNER button beforehand to switch the function of the remote control unit from TUNER to CD (or from CD to TUNER).

If the remote control unit doesn’t work, press the CD button or the TUNER button and try again. (Even when the CD or TUNER button is pressed without pointing at the main unit, the function of the remote control unit will be switched.)

30