FM/AM Tuner

Cannot listen to any station, or signal is too weak.

eTune in the station properly.

eRotate the FM or AM antenna for the best reception position.

eAn external antenna is recommended.

Though the broadcast is stereo, it sounds monaural.

ePress the FM MODE button.

DAB Tuner

No sound.

eEnsure that the CR-H257i has been able to locate DAB stations.

“NO stations Available” appears on the display. eCheck that antenna is connected (see page 14). eEnsure that DAB coverage exists in your area.

Cannot access secondary services.

eAt the time of publishing not many secondary services are available, this will increase as more DAB stations start broadcasting. If a secondary service station is available, the secondary indicator >> will be displayed next to the station name.

Display goes out or displayed “service off air”.

eThis may occur if a broadcaster changes the label of a service or removes a label whilst you are listening to it. The CR-H257i will try to retune to this station, or alternatively follow the procedure for auto tune on page 36.

Cannot listen to the selected station.

eEnsure you have pressed the ENTER button when you want to listen to your selection. The station you are currently listening to will be displayed on the first line of the display, as you scroll through the station order list the second line will show other station options. Press the ENTER button to activate your selection.

A burbling sound is heard on some stations.

eDAB like other digital media is good at producing quality audio from a low level signal, however if this signal level is too low a “burbling” sound can sometimes be heard. To reduce this, try repositioning your antenna to gain maximum signal strength.

If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again.

53