Teac CR-H257I To check the programmed order, To add a track to the program, To delete a track from the program, To clear the program

To check the programmed order

In the stop mode, press the PROGRAM button repeatedly. The track number and program number will be shown on the display.

To add a track to the program

In the stop mode, press the PROGRAM button repeatedly until the program number you want to insert a track appears on the display. If you want to add a track to the end of the program, press the PROGRAM button repeatedly until “P-End” briefly appears on the display.

Then select a track number using the numeric buttons. The track is added to the program.

To delete a track from the program

In the stop mode, press the PROGRAM button repeatedly until the program number to be deleted appears on the display, then press the CLEAR button. The selected track/file is deleted from the program.

To clear the program

1. In the stop mode, press the PROGRAM button.

2.Hold down the CLEAR button for more than 4 seconds.

<If one of the following buttons is pressed, the programmed contents will also be cleared:

SOURCE (AUX, TUNER, TAPE, iPod), OPEN/CLOSE (L), BAND

<If the unit is disconnected from the power supply, the programmed contents will be cleared.

33