12
Names of Each Control (Turntable)C
D
E
A
B
G F
Before use, detach the
stylus guard (white plastic
cover) by pulling it straight
off the front of the
cartridge in the direction
of the arrow.
turntable
screw fixing the turntable for transportation
Before use, completely loosen the screw by turning it
clockwise with a coin or screwdriver.
When you transport the unit, turn the screw counterclockwise
to fix the turntable.
cue-lever
Use this lever to lift the tone arm.
tone arm holder
tone arm
speed selector
45 RPM adaptor
G
F
E
D
C
B
AHow to open/close the turntable cover
To Open:
1.Lift the turntable cover all the way up until it stops.
2.Lower the cover slowly until the latch engages.
3.The cover will now stay open. If the latch does not engage,
repeat these steps again.
To Close:
1.Lift the cover all the way up until it stops.
2.The latch should disengage and you may now slowly lower the
cover.
3.Make sure you grasp the cover by the edges to avoid pinching
yourfingers as it closes.