Contents

Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit.

Important Safety Instructions

. 2

Contents

. 4

Before Use

. 4

Discs

. 5

Cassette Tape

. 6

Handling Records

. 7

How to Replace the Stylus

. 7

Connection

. 8

Remote Control Unit

. 9

Names of Each Control (Front Panel/Remote Control Unit)

10

Names of Each Control (Turntable)

12

Basic Operation

13

Listening to a Record

14

Listening to CDs

16

Programmed Playback

18

Intro Check

19

Shuffle Playback

20

Repeat Playback

20

Listening to the Radio

21

Preset Tuning

22

Listening to Tapes

23

Extended Playback

24

Recording

24

Dubbing (Copy from TAPE ! to TAPE @)

25

Setting the Clock

26

Setting the Timer

27

Timer Playback

28

Timer Recording

29

Display

29

Troubleshooting

30

Specifications

31

Before Use

Read this before operation

<As the unit may become warm during operation, always leave sufficient space around the unit for ventilation.

<The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

<Choose the installation location of your unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture.

<Do not place the unit on an amplifier/receiver or any other electronic device that generates heat.

<Do not open the sealed cabinet as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the set, contact your dealer or service agency.

<When removing the power plug from the wall outlet, always pull directly on the plug, never yank the cord.

<To keep the laser pickup clean, do not touch it, and always close the disc tray.

<Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a clean, dry cloth.

<Keep this manual in a safe place for future reference.

DO NOT MOVE THE UNIT DURING PLAYBACK

During playback, the disc rotates at high speed. Do NOT lift or move the unit during playback. Doing so may damage the disc or the record.

WHEN MOVING THIS UNIT

When changing places of installation or packing the unit for moving, be sure to remove the disc and the record. Moving this unit with the disc or the record loaded may result in damage to this unit. If the unit is to be packed and moved a large distance, it is also advisable to tighten the turntable transport locking screw. See page 12 for instructions.

Beware of condensation

When the unit (or a disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism, making correct operation erratic or impossible. To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. The unit will stabilize at the temperature of its surroundings.

Maintenance

Always keep the turntable clean.

If the surface of the unit gets dirty, wipe with a soft cloth or use diluted mild liquid soap. Be sure to remove any excess completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit. Allow the surface of the unit to dry completely before using

CAUTION

Do not expose this unit to liquids of any kind. Keep any objects containing liquids such as vases, water glasses, potted plants, et cetera off the top of this unit.

Do not install this equipment in a confined space such as a book-case or similar unit.

4

Page 4
Image 4
Teac Gf-680 owner manual Contents, Before Use