Teac Micro Hi-Fi System Programmed Playback, Muting, Sleep Timer, Headphones, Tone Control

Programmed Playback

FUNCTION

MEMORY

Muting

To mute the sound temporarily, press the MUTING button. Press the MUTING button again to restore the sound.

Sleep Timer

Repeatedly pressing the SLEEP button permits setting an interval (from 90 down to 10 minutes) after which you want the unit to automatically turn off and shift into Standby mode.

Each press of the SLEEP button changes the time indication by 10 minutes.

Up to 64 tracks can be programmed in the desired order.

1Press the FUNCTION button to select “CD”.

2Press the MEMORY button.

CDMP3

“MEMORY” lights up in the display.

<To cancel the program mode, press the Stop button (H).

3Press the Skip button (.or/) repeatedly to select a folder of a MP3 disc, then press the MEMORY button.

<MP3 tracks recorded out of folders are in the “001” (ROOT) folder.

<Skip this step when playing a CD.

MP3

4Press the Skip button (.or/) repeatedly to select a track, then press the MEMORY button.

CDMP3

The track is programmed, and “P-02” is displayed.

<Repeat steps 3 and 4 to program more tracks.

<You can program up to 64 tracks.

5When the selection of track numbers is completed, press the Play/Pause button (G/J) to start program playback.

<When the playback of all the programmed tracks has finished, or if you press the Stop button (H), the MEMORY indicator will go off and the program mode will be cancelled. Still the program is retained in memory.

You can return to the programmed playback by pressing the MEMORY button and the Play/Pause button (G/J).

<Shuffle function doesn’t work during programmed playback.

<While muting is engaged, “MUTING” blinks on the display.

<If you change the volume during the muting, the muting will be canceled.

Headphones

For private listening, first reduce the volume level to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume using the VOLUME buttons. The sound from the speakers is cut off while the headphone jack is inserted.

CAUTION

Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do not place your headphones on your head until after you have plugged them in.

90 80 ………10

(off)

Tone Control

1.Press the BASS or TREBLE button.

To adjust the level of low frequency sound range, press the bass button.

To adjust the level of high frequency sound range, press the treble button.

2.Within 5 seconds, press the VOLUME buttons to change the setting.

The level can be adjusted from –4 to +4.

20 13