Tech 21 Front Panel, TECH 21, THE COMPANY, SANSAMP PSA-1.1, AN OVERVIEW, Introduction, Pre-Amp

TECH 21, THE COMPANY

Tech 21 introduced the SansAmp™ Classic (the original pedal design) in 1989. Our proprietary circuitry pioneered Tube Amplifier Emulation in professional applications for recording direct and performing live, and created an entirely new category of signal processing. While there have since been many entries into this niche, SansAmp continues to maintain its reputation as the industry standard.

Engineered for the studio and stage, SansAmp delivers consistent quality sound. Players, engi- neers, and producers can obtain a wide spectrum of warm, natural tube amplifier sounds from one convenient unit. Available in various formats and models, each SansAmp is suitable for any music style, from jazz to metal, and can be used with a variety of instruments --guitar, bass, key- boards, samplers, even sax and vocals.

The SansAmp Classic was conceived and developed by a guitarist who possesses the unusual combination of a trained ear and electronics expertise. The technology is designed in the true tradition of tube amplifiers in their totality—with a pre-amp stage and an output stage. It incor- porates the harmonics and sweet overdrive characteristics unique to tube amplifiers. SansAmp captures these characteristics, and does so even at low volume levels.

SansAmp gives you the most coveted trademarked sounds and the flexibility to refine and rede- fine your own. Each model responds to and interacts with the dynamics of your individual play- ing style, your individual musical style, and your instrument’s individual tonality. All of these factors play an important role in the resulting sound, which will ultimately be yours alone.

SANSAMP PSA-1.1,AN OVERVIEW

SansAmp PSA-1.1 maintains its superior tone with our exclusive, 100% analog circuitry. Only the programming and memory sections are digital. The results are easy to hear: punchy, respon- sive, powerful sounds that bring out the best in any instrument.

The SansAmp PSA can be used for various applications. In the studio, you can record direct, enhance existing tracks in mixdowns, as well as add interesting touches to any instrument. Live,

FRONT PANEL

INTRODUCTION

The SansAmp PSA gives you access to specific tone-shaping characteristics within the tube amplifier sound spectrum. Controls of this nature are traditionally inaccessible on stock amps. Adjustments like these are ordinarily achieved only by permanent professional modification.

Tonality, for instance, can be adjusted in a variety of ways. The individual Character Controls, labeled Buzz, Punch, Crunch, and Drive, offer different results than the post EQ section (the controls labeled Low and High).

Gain structure can be adjusted via the Pre-Ampcontrol, which results in a different kind of overdrive than the Drive control. Additionally, Buzz, Punch, and Crunch each affect the gain structure within specific frequency bands.

As you experiment and become familiar with the controls’ interrelationships, you’ll be able to customize your own sounds and store them in the SansAmp PSA’s memory.

INPUT JACK

This 1/4" Input features an impedance buffer so that the tone from a guitar’s or bass’ pickups, or the signal from other instruments, reaches the SansAmp PSA without degradation. A second input jack is located on the rear panel. Note: plugging into the front-panel Input jack overrides and discon- nects the rear-panel jack. So you can set up your SansAmp PSA as a permanent part of a rack or patch-bay setup, with its usual input source plugged into the rear-panel jack. If you want to plug straight into the SansAmp PSA, bypassing other parts of the system, use the front Input.

it can be used as a pre-amp direct into a power amp with guitar or bass speaker cabinets, as a “monster direct box” to a P.A. system, (or both simultaneously), and as an outboard processor.

The SansAmp PSA features MIDI capability for calling up programs and storing program data. There are 49 factory presets and 77 memory locations to store your own custom sounds, plus two bypass programs. When you switch between programs, there is no lag time, or “cutting out.” The controls on the SansAmp PSA work very much like those found on a sophisticated amp. You don’t need special training or a degree in physics to operate your unit. Storing and recalling programs is simple: set your tones and push the Save button. You just turn a knob and hear the difference immediately --in real time. There are 256 incremental steps in the rotation of each

PRE-AMP

This is the input sensitivity control. The Pre-Ampcontrol adjusts the signal level going into the input section of the SansAmp PSA. The arrow indicates the unity-gain point (that is, no boost or cut). When clean sounds are desired with the use of a hot-output instru- ment, decrease from the unity-gain point. Increasing the position of the Pre-Ampcontrol produces an effect similar to putting a clean booster pedal into the input of a tube amp.

Arrow indicates unity-gain point

control, so increases and decreases occur in a smooth, gradual, linear fashion.

The SansAmp PSA is designed to provide you with the flexibility to find almost any conceiv- able tonal personality within the tube amplifier sound spectrum.

AFTER BURNER ZONE: The area where a low-cut/hi-boost function is activated. This gives more definition to individual notes when using high gain sounds. If buzzier, fuzzier sounds are desired, increase the gain by using the Drive control and set the Pre-Ampcontrol outside the After Burner zone.

4 5