EN
12
General operation
Switching the set on and off
To switch the TV set on, put the main power switch located at the rear on the ON position, then press the power button located on the front panel. When the set is on, the indicator on the front is green.
Standby mode: press the power button on the front panel. When the TV set is in standby mode, the indicator on the front is orange.
Volume
Volume control: use the buttons on the front panel or the remote control to increase and decrease the volume.
Sound mute: press the 
button on the remote control to temporarily mute the sound.
To restore it, press the 
button again or use the volume+ button.
Displaying status information
In TV mode, press the yellow info button on the remote control to display the number and name of the channel you are watching, the zoom format, the type of sound, and the remaining time if the sleep timer is on.
The number and name of the channel are displayed whenever you turn on the TV set or change channels.
Accessing TV channels
Using the numeric buttons: for channels 1 to 9, press the corresponding button. For
Using the pr+/pr- buttons: scan through the programmes. AV programmes are not accessible.
Accessing AV programmes
Press the av button to display the last selected AV programme and scan through the other AV programmes.
12 | 2003/9/5, PM 12:53 |
