Using the remote control for other equipment
The remote control supplied with your set can be used for other equipment, such as videorecorders, DVD players, satellite receivers or
REW
PLAY
F.FWD
STOP PAUSE REC
Video recorder
Set the switch to vcr
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To directly access channels or enter numeric values
To change channels
To select AV input
Rewind Play
Fast forward Stop Pause Record
DVD player
Set the switch to dvd/ld
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To enter numeric values or select options in menus
Rewind
Play
Fast forward
Stop
Pause
Satellite receiver
Set the switch to hifi/sat
On/Standby
To display the main menu
Vertical scrolling in menus
Horizontal scrolling in menus
To confirm an action
To close a menu
To directly access channels or enter numeric values
To change channels
Hi-fi system
Set the switch to hifi/sat
On/Standby
To select a radio station using its number
To change stations
To switch the sound off and back on again
To set the volume level
EN
7
Programming the remote control
1Set the selection switch to the unit you wish to use the remote control with.
2Hold the menu button down and enter one of the
3Release the menu button.
4Set your unit (VCR, DVD, HiFi, etc) in standby mode by pressing the standby button on the remote control. If this does not work, try another code.
Depending on the age or type of some products, certain functions may not be available.
Some codes may cover more functions than others. Test the functions that you can control and if necessary, try other codes.
Note the code or codes that are the most suitable here.
When you change the batteries in the remote control, remember to reprogram it.
7 | 2003/9/5, PM 12:52 |
