MAGNET ASSY ALIGMENT
1.Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit.
2.Turn OFF the power, close the door, and while pressing the [CLEAR] and [PLUSÊONE] buttons simultaneously, turn ON the power again.
3.Press the [CHECK] button, and set the loading mode.
4.Press the ± button and chuck the disc.
5.Adjust the magnet assembly and magnet holder so that A=B as shown in the figure.
A B | Magnet ASSY | |
|
|
|
Screw (For adjustment)
Magnet ASSY
Magnet holder
DISC HOLDER A ALIGMENT
1.Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit.
2.Turn OFF the power, close the door, and while pressing the [CLEAR] and [PLUSÊONE] buttons simultaneously, turn ON the power again.
3.Press the [CHECK] button, and set the loading mode.
4.Press the ± button and chuck the disc.
5.Press - or ± button to stop the disc holder A slightly away from the disc.
6.Rotate and adjust the adjusting screw so that the center of the disc and that of the disc holder coincide.
Disc holder A | Screw (For adjustment) |
|
Disc
Disc
Disc holder A | a b |
| a = b |