CS196 EN 17/2/06 7:29 PM Page 33
Troubleshooting Tips
Main Unit | EN |
Problem | Solution |
System will | • Check power cord for a secure |
not turn | connection. |
on | • Unplug the unit for a moment, |
| and then plug into power |
| source again. |
| • Check the outlet by plugging in |
| another device. |
No sound • Increase the volume setting.
(Refer to P.9)
•Check connection to speakers. (Refer to P.3)
•Check that you have selected the appropriate function: CD, Tuner.(Refer to P.4)
•Make sure mute is off.
•Make sure headphones are not plugged in.
Poor radio • Check antenna
reception connection.(Refer to P.3)
•Move antenna.
•Turn off nearby electrical appliances, such as hair dryer, vacuum cleaner, microwave, fluorescent lights.
CD does • Check that CD is in the
not play tray.(Refer to P.11)
•Check that CD label is facing up.(Refer to P.11)
•Check that PAUSE mode is not on.(Refer to P.11)
•Check that CD function is selected.(Refer to P.4)
•Use CD lens cleaner.(Refer to P.28)
•Clean the disc.(Refer to P.28)
•Try another CD.
•Switch to another function (Tuner) then back
to CD. (Refer to P.4)
Problem | Solution | |
CD sound | • | Clean the disc.(Refer to P.28) |
skips | • | Check disc for warping, |
|
| scratches, or other damage. |
| • | Check if something is causing |
|
| the system to vibrate. If so, |
|
| move the system. |
| • | Make sure the speakers are at |
|
| least 3 feet away or on a |
|
| different surface from the |
|
| main unit. |
Remote | • | Check that the batteries are |
control |
| properly installed.(Refer to |
does not |
| P.7) |
work | • | Replace weak batteries. |
| • | Check the system is plugged |
|
| into power source. |
| • | Point the remote directly at |
|
| the system’s front panel. |
| • | Move closer to the system. |
| • | Remove any obstacles |
|
| between the remote and the |
|
| system. |
|
|
|
26
