DPL906VD_EN 12/08/05 9:54 Page 3
Connections and Setup
Front panel controls
1
1.ON/STANDBY
To switch the appliance on and off.
2.OPEN/CLOSE
To open and close the disc tray.
3.SENSOR
Remote sensor. Point the remote control here.
4.PLAY/PAUSE
To start playing a disc or pause.
5.STOP
To stop disc playback.
EN
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
6.SELECT
To toggle between BASS/TRE and channel settings.
7.SOURCE
To select the input source (DVD, FM or AUX).
8.
PREVIOUS / 
NEXT
To skip to the previous or next chapter or track during playback.
In Tuner mode, to move to the previous or next preset memory location.
9.VOLUME +/-
To adjust the sound volume.
Inserting batteries in the remote control
AAA
AAA
•Do not mix different types of batteries or new and old batteries. Do not use rechargeable batteries.
•In order to avoid any risk of explosion, observe the polarities indicated inside the battery compartment. Replace only with the type of batteries specified above. Do not dispose of them in a fire or recharge them.
• If you are not using the remote control for a long period of time, remove the batteries.
• Please respect the environment and prevailing regulations. Before you dispose of batteries or accumulators, ask your dealer whether they are subject to special recycling and if they will accept 
them for disposal.
3
