DPL906VD_EN 12/08/05 9:54 Page 13
The player has a
Manual tuning
1.Connect the FM aerial in the correct manner.
2.Press several times the SOURCE button on the remote control or on the front panel to select the Tuner mode.
3.Tune a station by pressing repeatedly BACKWARD or FORWARD on the remote control until the desired station is found.
Alternatively, you can use the SCAN- or SCAN+ button to activate the automatic search function. In this mode the player will automatically tune frequencies until it finds a station.
4.Repeat steps 3 to tune to another radio station.
Note: If there is any interference, change the aerial’s position until the ideal sound reception is obtained.TV and other electronic devices could be the cause of interferences, so try to position the aerial away from them.
Radio |
| |
Storing radio stations |
| |
The player can store up to 40 radio stations in |
| |
its memory.You can enter every single radio |
| |
station yourself or the player can store all |
| |
available radio stations automatically in |
| |
ascending order. |
| |
EN | ||
Automatic preset programming | ||
| ||
|
|
1.Press the SOURCE button to enter the Tuner mode.
2.Press and hold PROGRAM down for 3 seconds to start automatic preset programming.
Note: A weak signal can affect the "Automatic preset programming” function’s efficiency. Adjust the aerial for better reception and a more efficient search.
3.Radio frequencies will be browsed and radio stations stored automatically.When all the available radio stations are stored or all 40 memory locations are full, the auto preset programming function will stop.
Manual preset
1.Tune to a radio station (see "Manual tuning" for details).
2.Press SLOW/MEMORY on the remote control. P00 will appear on the display.
3.Input your desired preset number
Retrieving preset stations
1.Press the SOURCE button to enter the Tuner mode.
2.Press PRESET- 
or PRESET+ 
or the numeric buttons on the remote control to select a preset station.
13
