DSA100_EN 16/04/02 12:04 Page 24
Appendix
Troubleshooting guide
Before requesting service (troubleshooting).
No power?
•Correctly connect the AC Power Cord to an AC Outlet.
There is no picture?
•Turn on the TV set and your DVD player.
•Check connections.
•Make the correct input selection on the TV set.
The menu language is not the one you want?
•The menu language for your player has not been set during
•Your preferred menu language on a DVD disc (if available) has not been set during set up.
•The menu is not available in your language on the DVD disc.
The remote control does not work?
•The batteries are fully discharged and must be replaced. When you insert the replacement batteries, ensure you align their positive and negative polarities correctly (k page 4).
•Remove batteries and hold down one or more keys for several minutes to drain the microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
•Point the remote control to the front of the player.
•Operate the remote control within an 8 m range from the player.
•Remove any obstacles between the remote control and the red LED on the player.
There is no sound or it can hardly be heard?
•Make the correct audio input selection and volume adjustment on the TV set or hifi system (amplifier or AV selector).
There are no subtitles?
•Check that the subtitle is recorded on the disc.
•Subtitles disappear from the TV screen. See how to display subtitles.
Audio (spoken) and / or subtitle language is not the
one selected during the initial player
•If the audio or subtitle language is not available on the DVD disc, the language selected during initial player
AUDIO “ 
” key and SUBTITLE “ 
” key to select it temporarily for this disc (Or press MENU during playback, if the disc has its own language selection menu).
If you forget your code key number for the parental
rating (locking) function, you must do the following:
•Open the player’s disc tray and, if it contains a disc, remove the disc. Close the disc tray. The player now
displays its menu on the TV screen.
Hold the STOP button down and press CLEAR. The
drive is now unlocked, all the other parameters
remain unchanged.
Technical data
Power requirements: AC 230 V, 50 Hz Power consumption: 15W Operating temperature range:
+ 5 to + 35° C Operating humidity range: 10 to 75% (no condensation)
Audio signal to noise ratio (DVD): 100dB (A wtd)* Wow and flutter: below measurable limits*
Total harmonic distortion: less than 0.004%* Pickup: Wave length: 655 / 780 nm, Laser power CLASS 1 - 2 Laser diodes
*Nominal Specification.
• THOMSON Multimedia reserves the right to change the specifications without notice.
Conception : M.Rensonnet - Réalisation : INTERCONCEPT | 24 | DVD - SHINCO / DXX 100 / EN - BK / RST - IC / |
|
|
