2_DTH231_EN 21/08/03 15:51 Page 23
Menus
Front Display menu
Depending on the brightness of the room where you’ve installed your player, select one of the 4 settings to adapt the brightness of the display panel to suit its environment.
1.If a disc is being played, press STOP (the player menu appears).
2.Press 
to highlight Display and press OK (The Display menu appears giving a choice of options).
3. Press | to highlight Front Display and press OK (The Front Display menu appears giving | EN |
a choice of options). | ||
4.Use keys 
or 
to highlight one of the four available options and press OK to validate your choice.
•Dim for Movies (dimmed lighting during replay of a disc),
•Off for Movies (no display during replay of a disc),
•Always Bright,
•Always Dim.
5.To return to the player menu, press 
until the menu is displayed on the screen.
PAL or NTSC TV sets
If the picture on the DVD being played appear in black and white on your TV screen, the standard of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to NTSC or vice versa. NTSC must be selected if the TV is connected to the player through the Y, PR and PB connections.
Select PAL/NTSC then with the OK key choose PAL or NTSC.
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
Progressive Scan
To display images on a TV set or a monitor (plasma, LCD, etc.), equipped with the Progressive Scan function, you must activate this function on your player by setting the Progressive Scan line to On (only available when NTSC is selected - see above - and the selector (4) on page 5 at the rear of the player is positioned on COMPONENT VIDEO OUT).
NB: if you activate this function when the TV set is connected to TV AUDIO VIDEO OUT socket at the back of the player the picture will disappear. To cancel the function set the selector (4) on the TV AUDIO VIDEO OUT.
23
