Technicolor - Thomson LDK 4482 manual Location of Controls and Functions

Location of Controls and Functions

Rear Panel

	1	2	3	4			5	6	7	8	9	10
FILTER			MSC.		VIEWFINDER						SIGN
0	0		0	Camera on	0	0	0		0		0
							Centre				Lamp
1(CLR)		4	Pip	Remote		R			Ext 1
							cross				off
				Heater
0	0		0		0	0	0		0		0
2		5	Auto	On air	Select	G	Safe		Ext 2		Dimm
			white				zone
0	0		0		0	0	0		0		0
3		6	VF			B	Focus		Y/ext		Call
			Boost				ind

1Optical filter selection

Select the optical filter by touching the appropriate numbered switch. Switch 1 : Clear filter

Switch 2 : ND 0.6 filter

Switch 3 : ND 1.2 filter

Switch 4 : ND 1.8 filter

Switch 5 : 4 Point Star filter

Switch 6 : 6 Point Star filter

The LED in the switch flashes during a change and then lights continuously to indicate the selected filter. (The operation of this switch depends on the user level that has been set for the camera.)

2Automatic white balance switch

camera is in the local control mode.

4LED indicators

CAMERA ON	: lights when the camera is receiving
	power.
REMOTE	: lights when the camera is in the
	remote control mode.
HEATER	: lights when the lens heater is on.
ON AIR	: the red LED lights when the camera
	is on air.
	: the yellow LED lights when the ISO
	signal is activated.

5Viewfinder R, G and B switches

Pressing this switch starts the automatic white balance process. This switch is in parallel with the AWB switch at the front/left of the camera and operates in the same way.

The LED in the switch flashes during the auto-white process. (The operation of this switch depends on the user level that has been set for the camera.)

3VTR switch

When pressed it starts or stops the VTR when the

Switches the R, G or B signal from the camera for display in the viewfinder. When an R, G or B switch is deselected, the Y or Y + c signal is displayed.

The selection of the Y or Y+c (contours added) signal is carried out in the Vf/Lens \ Vf Inst \ Vf mon menu on camera.

1-2 User's Guide LDK 4482 - SuperXpander 02.38.3