Technicolor - Thomson LDK 4482 Viewfinder indicators switch, Viewfinder EXT1, EXT2 and Y switches

	1	2	3	4			5	6	7	8	9	10
FILTER			MSC.		VIEWFINDER						SIGN
0	0		0	Camera on	0	0	0		0		0
							Centre				Lamp
1(CLR)		4	Pip	Remote		R			Ext 1
							cross				off
				Heater
0	0		0		0	0	0		0		0
2		5	Auto	On air	Select	G	Safe		Ext 2		Dimm
			white				zone
0	0		0		0	0	0		0		0
3		6	VF			B	Focus		Y/ext		Call
			Boost				ind

6Viewfinder indicators switch

Switches the centre cross, safe area and focus indicators in the viewfinder on and off.

7Viewfinder EXT1, EXT2 and Y switches

Switches the Ext 1 and Ext 2 signal for display in the viewfinder. Ext 1 and Ext 2 are also selectable with the pan-bar switches.

Y/ext on switches a mix of Y and Ext 1 or Ext 2 signal for display in the viewfinder.

Y/ext off switches only Ext 1 or Ext 2 signal for display in the viewfinder.

If no switch is selected the previous signal is displayed (R, G, B, Y or Y+c).

The Y or Y+c (contours added) signal is selected in the Vf/Lens \ Vf Inst \ Vf mon menu on the camera. Note: Viewfinder and External selection switches on the camera are disabled.

8Dim

Switches the brightness of the on-air lamp on the viewfinder up and down in steps.

9On air lamp switch

If function On air is on you can switch the on air lamp on the lens and 7-inch viewfinder on and off.

Note:

For function On air see Installation Manual Base Station.

10 Call switch

Pressing this switch sends a signal to the control panels calling for attention. An incoming call activates the LED in the switch.

02.38.3 User's Guide LDK 4482 - SuperXpander 1-3