3.2.3Step 3. Attach the power cord.
1.Plug the female end of the AC power cord to the POWER receptacle on the back of the switch.
2.Check the front LED indicators with the table 3.1. If the LEDs illuminate as expected, the switch hardware is working properly.
3.Plug the male end of the AC power cord into a wall outlet or a power strip.
English
| Figure 3.1. Overview of Hardware Connections |
LED Indicators |
|
This LED | Should be |
POWER | Solid green to indicate that the device is turned on. If this light is not on, |
| check if the power cord is attached to the switch and if it is plugged into a |
| power source. |
STATUS of | Solid green/amber to indicate that the device can communicate with your |
10/100 ports | LAN or flashing when the device is sending or receiving data from your LAN |
| computer. |
STATUS of | Solid green to indicate that the device can communicate with your LAN or |
Gigabit ports | flashing when the device is sending or receiving data from your LAN |
| computer. |
| Table 3.1. LED Indicators |
GigaX Centralized Network Management User’s Manual | 11 |
