Asus GIGAX1024P

GigaX Centralized Network Management User’s Manual 13

English

Figure 3.3. Available Switches

3. Select the proper NIC at the same network with the switch, then click on the

Discovery icon in the tool bar. After the discovery is done, the left frame of

the window will show the MAC addresses of the switches discovered by the

CNM as Figure 3.3.

4. Select the switch you want to manage by clicking on the MAC address, then

you can start to configure the switch by CNM.

5. If the CNM cannot discover the switch you want to manage, please repeat

step 1 to 4 again.

Note: The switch must be powered on and connect to your network before

starting the CNM.

Contents

Main Copyright Information Limitation of Liability Page Table of Contents 1 Introduction 1.1 GigaX 1024P Features 1.2 Using this Document 1.3 ASUS contact information 2 Getting to Know the GigaX 1024P 2.1 Parts List GigaX Centralized Network Management Users Manual 7 English The rear panel contains the ports for the units power connections. 2.2 Front Panel The front panel contains LED indicators that show the status of the unit. 2.3 Rear Panel 2.4 Technical Specifications 3 Quick Start Guide 3.1 Part 1 Connecting the Hardware 3.2 Part 2 Start the Switch Page 3.3 Management from CNM Page Page 4 Management Functions 4.1 Start CNM Program 4.2 Functional Layout Page 4.3 General Settings for CNM Page Page 4.4 Switch Topology Page Page 4.5 Switch Setup 4.6 System Page Page Page Page Page 4.7 Configuration Page Page Page Page Page Page 4.8 Statistics