Link aggregation creates new virtual links with more bandwidth. For example, port 1 and 2 can work together as one link to another device. The new virtual link has 200Mbps bandwidth. The switch provides 8 groups of link aggregations shown on the top of figure 4.19.
Click on the Reload button to retrieve the configuration from switch. The checked trunk group means this group has been activated. You can check the trunk group to enable new trunk or uncheck the trunk group to disable the trunks. Click on Apply to make them effective in the switch.
The Trunking Status shows the ports work as trunk ports currently. A green light in the port means the port is working as trunk port properly, otherwise it shows no light.
4.7.3 Bandwidth
English
Figure 4.20. Bandwidth Configuration
1024P provides TX/RX bandwidth control for each port. Please reload the configuration before you start to set up new configuration. The page is shown as figure 4.20.
Select the ports you want to configure, then select proper bandwidth for TX/ RX directions. Click on Apply to apply to the switch.
GigaX Centralized Network Management User’s Manual | 33 |
