Asus GIGAX1024P warranty Enable or disable a port, Link Aggregation

English

1.Enable or disable a port

2.Speed and duplex mode. Select 1000 full-duplex on the Fast Ethernet ports (from 1 to 24) will set the ports to 100 full-duplex mode.

3.Flow control - Back pressure flow control is used in half and full duplex modes to prevent packet loss.

A software reset will be triggered after the configuration is apply. The purpose of software reset is to restart link negotiations.

4.7.2 Link Aggregation

Figure 4.19. Link Aggregation

32 GigaX Centralized Network Management User’s Manual