![](/images/new-backgrounds/1127096/12709657x1.webp)
Private Data
Triax Cable
Tracker Channel | PROG Channel |
P&T
HDTV
Camera Base Station
Tracker Channel
CTL
PROG Channel
A Control is as an example
connected to the Aux
connector.
A pan and tilt unit as an example connected to the Aux connector.
Private data channels can be used for the transmission of serial data via the triax cable. For example, electronic scriptboard or character data for a video display unit can be transmitted to the camera.
The tracker microphone intercom channel is used for the data channel from camera head to Base Station. The program intercom channel is used for the data channel from Base Station to camera head. The input and output signals are available on the auxiliary connectors of the camera and Base Station (for camera see the connectors and cables section). If a channel is used for private data, then of course the original functions are no longer available.
To select the function of the Camera to Base Station channel set the Base Station menu item Audio/Intercom \ Private Data \ Tracker Channel to Priva.
Remember that the
Data signal specifications
Baudrate: 2400
Input level: TLL, possible RS232
To select the function of the Base Station to camera channel set the Base Station menu item Audio/Intercom \ Private Data \ PROG Channel to Priva.
Input impedance: 100Kohm
Output impedance: ~300 ohm
Max load: ~1Kohm
Installation | User's Guide LDK 4502 - HDTV Camera Base Station |