Sound Features

Technicolor - Thomson MS4000 manual Sound Features

Models: MS4000

MS4000 EN 3/5/03 8:46 AM Page 10

EN Using Preset Equalizer Curves

Creating a Custom Curve

BAS+08

X- Surround

CD PLAYER

Loading Discs

Playing Discs

Play and load simultaneously by:

Press PRESET EQ on the main unit or EQ on the remote to toggle among FLAT, ROCK, POP, JAZZ, CLASS and CUSTOM. The display shows the selection briefly.

1.Press PRESET EQ to select CUSTOM mode.

2.While "CUSTOM" is displayed, press DIGITAL

TUNING / to cycle among displayed bass- and treble - range levels.

3.While BAS or TRE is displayed, press

VOLUME UP / DOWN to set the associated gain between -10 - +10.

BASS BOOST

Press B. BOOST to turn on/off boosting the bass frequency.

Muting Audio

Press MUTE on the	MUTE
remote to cut the sound.

(Remote Only)

Press X-SURROUNDto enjoy enriched sound quality. This feature gives you:

1.Better width and depth for vocal and instrumental sound.

2.More powerful presence for studio recording.

3.Enhanced surround effects with greater flexibility in positioning speakers.

CD-R / RW	This unit is compatible with
	This unit is compatible with
	CD-RW/ CD-R discs for play-
	back.

Notes on CD-R/RW Disc:

•Do not affix any type of labels to either side (recordable or labeled side) of a CD-R/RW disc as this may result in the unit malfunctioning.

•To avoid damages to the CD-R/RW disc, do not open the disc compartment door while the disc is being read.

•Do not load an unrecorded CD-R/RW disc into the unit. This may take a longer time to read the disc.

•Playback capability for CD-RW discs may vary due to variations in the quality of the CD-RW disc and the recorder used to create the disc.

Note: Be sure to remove all discs from the disc compartment before moving or transporting the unit!

1.Press SOURCE repeatedly to select CD mode.

2.Press OPEN•CLOSE to open the drawer.

3.Insert up to five discs with label face up. (Press DISC SKIP to rotate the disc carrier.)

4. Press OPEN•CLOSE to close the drawer. Loaded disc position icon lights.

1.Press OPEN•CLOSE to open the tray while a CD is playing

2.Load/change discs for available trays by pressing

DISC SKIP.

3.Press OPEN•CLOSE to close the tray.

• Press PLAY/PAUSE

to begin or pause play, and

to stop play.

• Press SKIP BACKWARD

/ SKIP FORWARD

to select a specific track.