Technicolor - Thomson MS4000 Display Settings, Showing the Demonstration, Display Clock / Alarm

Models: MS4000

1 16
Download 16 pages 56.85 Kb
Page 9
Image 9
Display Settings

MS4000 EN 3/5/03 8:46 AM Page 9

Display Settings

EN

Showing the Demonstration

Magic demonstration is available in all modes except for when timer is on or sleep mode is activated. Press DIMMER/DEMO to turn on/off magic demonstration mode. The demonstration scrolls through all display operations.

5. Press TIMER to select source. Press DIGITAL

TUNING Showing the DemonstrationDisplay Clock / Alarm or Setting the ClockSetting the Timer to select between CD /TUNER/

TAPE/REC TU.

6.Press TIMER to set volume. Adjust volume with the VOLUME CONTROL to set desired volume level.

7. Press PROGSET to save settings or STOP

to

quit setting.

 

Display Clock / Alarm

Setting the Clock

1.Press and hold CLOCK/RDS until the hour flashes on the display.

2.Press DIGITAL TUNING Activating the TimerAdjusting the Display Brightness or DIMM 2Sleep Mode to set the hour and then press CLOCK/RDS to shift to minute digits.

3. Press DIGITAL TUNING

or

to set the

minute.

 

 

4.Press PROG•SET to save settings and STOP Manual backgroundManual background to quit setting.

Note:

When system is ON, you can press CLOCK/RDS to display the current time for about 2 seconds.

Clock cannot be set in FM Mode.

Setting the Timer

1.Press and hold TIMER until the ON and clock time flash on the display ( ON - timer on time ).

2.For setting time, press DIGITAL TUNING Manual backgroundManual background or

Manual backgroundManual background to set the hour and then press TIMER to shift to minute digits.

3.Press DIGITAL TUNING Manual backgroundManual background or Manual backgroundManual background to set the minute.

4.Press TIMER to change to OF (timer off time) with clock time flashing. Repeat steps 2 & 3 for timer off time setting.

Activating the Timer

Press and release TIMER to turn on/off the alarm. The alarm is active when the clock icon indicator is lit.

Adjusting the Display Brightness

1.Press and hold DIMMER/DEMO for more than 2 seconds.

2.While the dimmer is displayed, press and release DIMMER/DEMO to select the desired level (DIMM

1- 3).

DIMM 2

Note:

The dimmer level can only be adjust for when the unit is in ON mode.

In standby mode, the dimmer level remains at DIMM 3 and in magic demo mode, the dimmer level is at DIMM 1.

Sleep Mode

You can select the time interval in minutes before the unit turn off automatically. Press SLEEP on the remote to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes. (Remote only)

5

Page 9
Image 9
Technicolor - Thomson MS4000 manual Display Settings, Showing the Demonstration, Display Clock / Alarm, Dimm, Sleep Mode