Technicolor - Thomson RP5430 manual Exposure Time switch, VTR Start button

	1
								2
				A	1	Clear
		Clear
			4P	B	2	ND1/4
	Star
								3
							1/16
			6PC		3	ND
	Star
							1/64
				D	4	ND
		focus
	Soft
								4
12
11								5
10								6
						7
9	8

position. Refer to Section 5 for more information on how to use the automatic white balance.

Note:

Black balance is not necessary with this camera because of the continuous automatic black control circuits.

10Exposure Time switch

This up/down momentary switch gives a choice of eight exposure time settings. These are:

Nom. - nominal setting

Cl.Scan		- for shooting computer monitors with
	higher frame frequencies than the camera
Crt	- for shooting sync-locked monitors
1/200	- for fast moving objects
1/500 - for fast moving objects
1/1000		- for fast moving objects

50 Hz - shooting with 50Hz lighting (adjustable)

60 Hz - shooting with 60Hz lighting (adjustable)

If an exposure time other than nominal is selected, the non-standard indicator (!) in the viewfinder lights.

Sometimes when shooting TV screens or monitors with the same display frequency as the camera, a horizontal black bar is seen in the viewfinder because the camera is blanking while the TV is not.

The V-Shift switch shifts the camera blanking. It is spring-loadedwithacentralrestposition.Holding the switch in the + or - position moves the bar up or down so that it is no longer visible in the viewfinder. This function is only available when the camera is used in the stand-allone mode and is not active when the camera is genlocked or on-air.

12VTR Start button

In the triax mode this button switches the intercom microphone of the headset to the production intercom channel. This button operates in parallel with the VTR button on the lens.

11Vertical Shift switch (V-Shift)

4-6 Operator's Manual LDK 200 Triax Location of Controls and Functions