Technicolor - Thomson RP5430 manual Auxilary Functions, Call button, Script Light connector

Auxilary Functions

		1
			Eng	Front
			Off
			Prod	Rear
			Ext	Loc		Tracker
			Mix
				Call		Aux
		CVBS (option)
				Mic	4	5
		VF	Ext
		Front Rear 48V
		Scrip
		Light
	2	Breaker		DC in
		Power on
		TP		48V On		REF
		Ext 1				IN
		3				6
1	Call button

Pressing this momentary button sends a signal to the control panels calling for attention.

2Script Light connector

A 3-pole socket which supplies +12 Vdc for a script light (maximum dissipation 0.25A). The optional script board (LDK 6985/15) is connected to this socket.

4Aux connector

This 11-pole female socket provides analogue control signals and facilities for the connection of a private data channel (see installation manual).

5Tracker connector

This 11-pole female socket provides full intercom and signalling facilities for the dolly or crane driver (see installation manual).

3 Teleprompter output socket 6 Reference input socket

This BNC conector supplies the 1Vpp teleprompter signal applied to the base station.

(This socket has no output if the reference input socket is used as a return video channel).

This BNC conector is used to supply a 1Vpp reference signal to the camera for genlocking when the optional encoder (LDK 5435) is fitted.

This connector can be used as an input socket for a 1Vpp CVBS signal which is output on the TP out connector of the Base Station. This is only possible with Base Station type LDK 4501 and when the optional encoder (LDK 5435) is fitted.

Select the function of this socket in the Install menu of the camera or the System menu of the Base Station.

Location of Controls and Functions Operator's Manual LDK 200 Triax 4-13