Location of Controls and Functions Operator's Manual LDK 200 Triax 4-11
Clear Clear
A1
Star 4P ND1/4
B2
Star 6P ND 1/16
C3
Soft focus ND 1/64
D4
Intercom44Headset Programme volume control
This control varies the volume of the programme
intercom signal to the cameraman's headset.
55Headset Engineering volume control
This control varies the volume of the engineering
intercom signal to the cameraman's headset.
66Cameraman intercom connector
Headsets with dynamic or electrete type microphones
can be connected to this socket.
77Headset Production volume control
This control varies the volume of the production
intercom signal to the camera operator's headset
when the selection switch (2) is in the FRONT
position.
11Intercom routing switch
A 3-position switch that routes the camera operator
intercom microphone signal to engineering
(ENG) or production (PROD), or turns off the
intercom. The momentary VTR switch at the
front of the camera, or on the lens can be used
to route the cameraman's intercom microphone
signal to production, regardless of the position
of this switch.
22Headset Production vol. control
selection
A 2-position switch for the production intercom which
selects control of the volume at the front of the
camera (7) or control of the volume at the rear
(3).
33Headset Production volume control
This control varies the volume of the production
intercom signal to the camera operator's headset
when the selection switch (2) is in the REAR
position.
Call
Mic
VF
Front Rear 48V
Ext
Scrip
Light
Breaker
Power on
DC in
CVBS (option)
Eng Progr Prod
Eng
Off
Prod
Ext
Mix
Front
Rear
Loc
TP
Mic 2
48VOn
12V 1,5A DC Out
Ext 2
Ext 1
1 2 3
4
5
6
7