1.5-inch Viewfinder
Mounting the 1.5-inch viewfinder and microphone holder
3 |
|
2 | 1 |
5 |
|
| 4 |
6 |
|
To mount the 1.5-inch viewfinder proceed as follows:
a.Loosen locking ring 1 of viewfinder support bracket 2 at the front of the camera handle. (As seen from
the rear of the camera, turning the locking ring counterclockwise moves it towards the handle.)
b.Slide the viewfinder onto the viewfinder support bracket.
c.Tighten the locking ring 1 by turning it clockwise (as seen from rear) so that the viewfinder is mounted securely to the support.
d.Connect the viewfinder cable to the viewfinder connector socket 6 at the top right of the camera.
e.Slide the microphone holder 4 onto the viewfinder and secure with the knurled screw 5 .
CAUTION
Always fit the microphone holder 4 as it functions as a safety stop for the viewfinder.
f.To improve the comfort of the skin contact when using the viewfinder, fit the eye piece cover 3 to the rubber eyepiece.
Positioning the 1.5-inch viewfinder
| 1 |
| 2 |
| 3 |
5 | 4 |
The horizontal position of the viewfinder can be adjusted as follows to suit your requirements:
a.Loosen the locking ring 1 . (As seen from the rear of the camera, turning the locking ring counterclockwise moves it towards the handle.)
b.Slide the viewfinder horizontally along the rail to the desired position.
c.Tighten the locking ring 1 by turning clockwise.
The dioptre hood and eyepiece of the viewfinder can be rotated vertically.
The viewfinder can be positioned backwards and forwards along the camera axis. Loosen the support bracket round bar retaining lever 2 and slide the round bar 3 forwards or backwards. When the desired position is reached tighten the support bracket round bar retaining lever 2 again.
To use the viewfinder at a distance press the button
4below or above the eyepiece tube and swing it free of the associated clip 5 . The display can now be seen from further away.
Operator’s Manual LDK 200 Triax | Assembling the Units |
