Technicolor - Thomson SpeedTouch 121g manual Installation procedure

Chapter 1

SpeedTouch™121g Installation

1.2 SpeedTouch™121g Installation

System Requirements Before you install the SpeedTouch™121g, check your system for the following:

A computer with a USB port

To obtain maximum wireless networking speed, a USB v2.0 port is needed.

Microsoft Windows 98 SE/Me/2000/XP

You may need your Windows installation CD during driver and utility installation.

A minimum of 1.5 MB of free disk space for installing the driver and utility program

Installation procedure

!	Do not connect your wireless device to your PC until you are instructed to
	do so by the InstallShield wizard.

Proceed as follows:

1Insert the SpeedTouch™ Setup CD-ROM in your computer’s CD-ROM drive. The SpeedTouch™ CD Browser will start automatically.

If the SpeedTouch™ CD Browser window does not appear automatically, click Run on the Start menu and enter the following path: D:\Menu.exe where D stands for the drive letter of your CD-ROM drive.

2The Choose Language window prompts you to select a language:

Select your language and click OK.

3The SpeedTouch™ CD Browser menu appears:

Click Install my SpeedTouch™.

E-DOC-CTC-20040903-0001 v2.0 9