9 Technical Specifications of Model TU-SZT105A
|
|
|
|
|
| Terrestrial |
| Input frequency | VHF, UHF Band |
| Tuner/Demodulator |
| Standard | |
|
|
| Channel Bandwidth | 7/7 MHz, Australian Channel |
|
|
| COFDM System | 2K, 8K carrier |
|
|
|
| Hierarchical supported |
|
|
| Demodulation type | QPSK, 16QAM, 64QAM |
|
|
| Guard Interval | 1/32, 1/16, 1/8, 1/4 active symbol |
|
|
|
| duration |
|
|
| FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
| System |
| CPU / Clock | STi5518M / 81MHz |
|
|
| Transport | DVB Demultiplexer |
|
|
| Flash memory | 2 MB |
|
|
| Shared memory | 8 MB |
|
|
|
|
|
| Video decoder |
| Bitstream accepted for Video | |
|
|
|
| |
|
|
| MP@ML, SP@ML, MP@LL | |
|
|
| Video data rate supported | 1 ~ 15 Mbps |
|
|
| Aspect ratio | 4:3 and 16:9 with Pan & Scan, |
|
|
|
| Support Letter Box mode |
|
|
| Video output | PAL (720x576i) |
|
|
|
| One SCART for TV |
|
|
|
| (CVBS, |
|
|
|
| Composite video CVBS |
| Caption / Teletext |
| Decoding and display of Closed | Activated by specific |
|
|
| Captions |
|
|
|
| Decoding and display of Teletext | Activated by specific |
|
|
| (ETS 300 706, Level 1.5, TOP) |
|
| Audio decoder |
| Audio | |
|
|
|
| Dolby Digital |
|
|
| Sampling rate | 32, 44.1 and 48KHz |
|
|
| Bit rates | Layer I |
|
|
|
| Layer II |
|
|
| Audio output | Stereo Audio AL / AR and down |
|
|
|
| mixing surround Lt/Rt |
|
|
| Digital Audio SPDIF Output format | |
| Serial Port |
| Up to 115200 bps | |
| Software Upgrade |
| Support Over Air Download | ETSI Standard |
| Rear panel interface |
| RF input connector | IEC type, Female, 75 ohm |
|
|
| Loop through output connector | IEC type, Male, 75 ohm |
|
|
| A/V output | TV SCART x1 |
|
|
| CVBS video output | RCA x1 |
|
|
| Stereo (left & right) Audio output | RCA x2 |
|
|
| Digital Audio SPDIF (Coaxial) | RCA x1 |
|
|
| ||
|
|
| Power Jack |
|
| Front panel |
| 1 dual colour LED indicator | RED for Standby and GREEN for |
|
|
|
| On |
|
|
| 3 keypads | Power, CH Up, CH Down |
|
|
|
| |
|
|
| IR Sensor |
|
|
| 23 |
|