4.1 Installing Your Digital Receiver – Quick Set Up Guide
Installation
SCART Mode
The first time the digital receiver is installed, or after Default Condition is restored (section 6.4), you will be asked to select the video connection format. Select the video format that is the same as the AV lead connection you have made to the TV display (refer Quick Connect Guide section 4).
Select Region
The first time the digital receiver is installed, or after Default Condition is restored (section 6.4), you will be asked to select the region you live in so that the digital receiver will display the correct local time. The regions are New South Wales, Victoria, Queensland, South Australia, Western Australia, Tasmania, Northern Territory and Australian Capital Territory and are selected by the up/down cursor keys.
Select Aspect Ratio
The first time the digital receiver is installed, or after Default Condition is restored (section 6.4), you will be asked to select your preferred aspect setting. This is a choice of the Wide (16:9), Normal / Centre Cut (4:3) or Normal / Letter Box (4:3). Select the aspect that is correct for your TV display. This can be changed at a later date.
Preferred Audio Type
The audio can be received in two format types, Dolby Digital and MPEG. The broadcasters sometimes use both types, please select which format that you prefer to listen to. This format will be select when the broadcaster transmits both types. This can be changed at a later date.
Autotune
The first time the digital receiver is installed, or after Default
Condition is restored ( Section 6.4), the digital receiver will Automatically scan for available digital services. This may take Up to 5 minutes. After tuning finishes press OK.
Please select SCART mode
Component
Composite
RGB
Please select your state / region
New South Wales
Victoria
Queensland
South Australia
Western Australia
Tasmania
Northern Territory
Australian Capital Territory
Please select your preferred display aspect ratio
Wide (16:9)
Centre Cut
Letterbox
Please select the audio type you prefer
MPEG1
Dolby Digital
8