4 Installing Your Digital Receiver - Quick Connect Guide
The Set Top Box and the |
|
|
|
television use a number of |
|
|
|
different connectors. The main |
|
|
|
ones that you need to identify are: POWER | RF | SCART | RCA |
The POWER connector is used to connect mains power (via the power pack) to the Set Top Box. RF connectors are used for connecting antenna leads. The SCART connector and RCA connectors are used for video and audio connections.
Start: | To TV |
1 Connect the power pack to the Set Top Box. Use the connector marked POWER.
2 Connect the Set Top Box to a good quality outside /
roof antenna. Use the connector marked RF IN.
3Use the included SCART to RCA connection lead to connect to your television.
4Connect the red audio lead to the red audio connector on the television. Connect the white audio lead to the white audio connector on the television. Remember that you must connect
the video to the same AV Input as the audio. |
|
| Television | |||
If TV has COMPONENT |
|
|
| AUDIO OUT R (Red) | AV Input | |
|
|
| R (Red) | |||
|
|
|
| |||
VIDEO |
|
|
| AUDIO OUT L (White) | AUDIO IN | |
|
|
|
| L (White) | ||
If your television has |
|
|
|
| ||
| CVBS OUT (Yellow) |
| PY OUT (Green) | Y IN (Green) | ||
Component inputs (also |
|
|
| |||
| Not used |
| PB OUT(Blue) |
| ||
called YPBPR, DVD, YUV or |
|
|
| PB IN (Blue) | ||
|
|
| PR OUT(Red) | |||
YCBCR) use them as they will give the best picture. Connect the | PR IN (Red) | |||||
| ||||||
red video lead to the red video in connector on the television. Connect the blue |
| |||||
to the blue and the green to the green. |
|
|
|
| ||
Do not connect the yellow lead. |
|
| If TV has Composite ( CVBS) | |||
|
| Television | VIDEO |
| ||
| AUDIO OUT R (Red) | AV Input | If your television does not have | |||
|
| R (Red) | Component inputs then connect | |||
| AUDIO OUT L (White) | AUDIO IN | the yellow lead to the yellow | |||
|
| L (White) | ||||
Y OUT (Green) | CVBS OUT (Yellow) | VIDEO IN | connector on the television but | |||
PB (Blue) |
| do not connect the green, blue or | ||||
and PR (Red) |
| (Yellow) | ||||
Not used |
|
| red video leads. |
| ||
|
|
|
|
Turn the TV and the Set Top Box ON. Using the TV remote control, select the AV Input that the Set Top Box has been connected too.
7