Technicolor - Thomson TU-SZT105A 5.1Switching On Your Digital Receiver, Information Plate

5 Operating Instructions: Knowing your basic controls

To become acquainted with the operations and functions of your receiver, you should learn how to use the control buttons on the Front Panel and the Remote Control.

The following section is an introduction to the features that will be most commonly used.

5.1Switching On Your Digital Receiver

Ensure the power lead of the power adaptor is plugged into a 240V AC socket. Switch on the 240V AC socket at the wall. Turn on your digital receiver by pressing either

the button on the remote control or the button on the front panel. When the digital

receiver is in normal viewing ON mode, the LED turns green.

When the receiver is not being used, place the receiver in the "STANDBY" mode, by
pressing either one of the	/	buttons again. When the LED turns red, it indicates the

digital receiver is in “STANDBY” mode.

Information Plate

The Information Plate (I-Plate) shows information about the program that you are currently watching. The information plate appears briefly whenever you switch to a new channel or when there’s a problem with TV signal reception. To show the information plate, press the button. Press EXIT to remove the I-Plate from the screen.

Program Guide

The Program Guide is a user-friendly feature, which enables you to select and book programs. To enter into the Program Guide, press GUIDE/INDEX. In the Program Guide on-screen display, the program schedule is listed in chronological order. Press EXIT to remove program guide from the screen.

Section 6.1 of your User Manual will instruct you to use the Program Guide efficiently.

9