6 EN

GETTING STARTED

Power

Battery pack BAT 600

POWER indicator

To AC outlet

AC Power

Adapter/Charger

DC OUT connector

This camcorder’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

CHARGING THE BATTERY PACK

1 Make sure you unplug the camcorder’s DC cord from the AC Power Adapter/Charger. Plug the AC Adapter/ Charger’s power cord into an AC outlet. The POWER indicator lights.

2 Attach the battery pack with the mark aligned with the corresponding marks on the AC Power Adapter/Charger. The CHARGE Indicator begins

CHARGE indicator

Battery pack

Fully charging time

 

 

BAT 600

approx. 1 hr. 30 min.

 

 

blinking to indicate charging has started.

3 When the CHARGE indicator stops blinking but stays lit, charging is finished. Slide the battery and lift off. Remember to unplug the AC Adapter/Charger’s power cord from the AC outlet.

NOTES:

●If the protective cap is attached to the battery pack, remove it first.

●Perform charging where the temperature is between 10° C and 35° C. 20° C to 25° C is the ideal temperature range for charging. If the environment is too cold, charging may be incomplete.

●Charging times noted above are for a fully discharged battery pack.

●Charging time varies according to the ambient temperature and the status of the battery pack.

●To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.

●If you connect the camcorder’s DC cord to the adapter during battery charging, power is supplied to the camcorder and charging stops.

●Since the AC Power Adapter/Charger processes electricity internally, it becomes warm during use. Be sure to use it only in well-ventilated areas.

●When charging the battery pack for the first time or after a long storage period, the CHARGE indicator may not light. In this case, remove the battery pack from the AC Power Adapter/Charger, then try charging again.

●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10° C), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

VMD6 EN(02/39)

6

28/08/00, 15:46

Page 6 Page 8
Page 7
Image 7
Technicolor - Thomson VMD 6 user manual Power, Charging the Battery Pack, About Batteries, Charge indicator
Page 6 Page 8

VMD 6 specifications

The Technicolor - Thomson VMD 6 is a sophisticated video module designed for advanced video processing and distribution applications. Known for its reliability and high performance, the VMD 6 is widely utilized in broadcast, multimedia, and video surveillance systems. Its robust architecture ensures that it meets the demanding requirements of contemporary content delivery networks.

One of the standout features of the VMD 6 is its ability to support various video formats, including SD, HD, and even 4K resolutions. The module is equipped with an automated format detection system that simplifies the integration of different video sources, making it adaptable to various workflows. This versatility is crucial in environments where multiple video streams must be handled simultaneously without compromising quality.

The VMD 6 leverages advanced compression technologies to efficiently encode and decode video streams. It incorporates industry-standard codecs such as H.264 and H.265, enabling high-quality video streaming while minimizing bandwidth usage. This compression capability is particularly beneficial for delivering content over constrained networks, ensuring seamless playback regardless of connection quality.

Another key characteristic of the Technicolor - Thomson VMD 6 is its real-time processing capabilities. The module features low-latency processing, which is essential for live broadcasts and interactive applications. Its architecture allows for frame-accurate editing and timing synchronization, making it an ideal choice for broadcast studios and post-production facilities.

The user interface of the VMD 6 is designed for ease of use, providing operators with intuitive control over the module’s features. With comprehensive monitoring options, users can track video quality metrics and system performance in real-time, enabling proactive maintenance and troubleshooting.

In terms of connectivity, the VMD 6 offers multiple input and output options, including HDMI, SDI, and IP streaming. This ensures compatibility with a wide range of external devices and simplifies integration into existing infrastructures.

Overall, the Technicolor - Thomson VMD 6 stands out as a versatile and powerful video module. Its support for various video formats, advanced compression capabilities, real-time processing features, and user-friendly interface make it an invaluable asset for any organization looking to enhance its video processing and distribution efficiencies. This module represents a significant advancement in video technology, catering to the needs of contemporary media environments.
Top Page Image Contents