Enjoying discs
Display is wrong or play won’t | The disc may be upside down. > |
start. | Wipe the disc. |
| Replace the disc if it is scratched, warped, or nonstandard. |
| Condensation may have formed inside the changer due to a sudden change in temperature. Wait |
| about an hour for it to clear and try again. |
|
|
“TAKE OUT/DISC” appears on | There is a problem with the disc mechanism. (A power failure may have occurred.) |
display. | The tray will open automatically. Remove the disc from the tray, and close it after ensuring there is |
| no disc in the tray. The unit will make disc changing noises for a few moments and then it should |
| operate normally. |
|
|
Picture does not appear on TV | The region number of the disc doesn’t match the region number of this unit. = |
screen when playing DVD. | Connect the video cord. 6 |
| Set the television to video input mode. |
|
|
Picture does not appear on TV | Connect the video cord. 6 |
screen when playing Video CD. | Set the television to video input mode. |
|
|
ALL DISC, program and random | Ensure a Video CD or CD is in the play position tray. |
play cannot be used. |
|
|
|
Picture on TV screen disappears | The location and orientation of the antenna are incorrect. If you are using an indoor antenna, change |
or stripes appear on screen. | to an outdoor antenna. |
| The television antenna wire is too close to the system. Separate the antenna wire of the television |
| from the system. |
|
|
You have forgotten your ratings | Reset the unit to its original factory settings by doing the following procedure. |
password. | When “DVD” is selected as a source, press [ º] on the changer and [L] on the remote control at |
(Reset all the settings to Factory | the same time for about 3 seconds until the message “Initialized” disappears from the television |
Preset) | screen. |
|
|
During one touch disc editing (ápage 38)
“DECK NO TAPE” displayed. | Load a cassette into deck 2. U |
|
|
“DECK CHANGE TAPE” | If the erasure prevention tabs have been removed, cover the holes with adhesive tape. T |
displayed. |
|
|
|
Remote control
Remote control doesn’t work. | Check the batteries are inserted correctly. ; |
| Replace the batteries if they are worn. |
|
|
All components are required to service the system. If service is ever necessary, bring the entire system.
Reference
Maintenance
If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a soap-
ÁNever use alcohol, paint thinner or benzine to clean this unit.
ÁBefore using chemically treated cloth, read the instructions that came with the cloth carefully.
For a cleaner crisper sound
Clean the heads regularly to assure good quality playback and re- cording. Use a cleaning tape (not included).
55
RQT5471
